Custom Rifle Bore Guides

At Arizona Ammunition, LLCĀ® we are serious about quality bore guides. We are pleased to offer several different kinds of bore guides in 2014-15. Accuracy shooters know that a quality properly fitting bore guide is necessary when you clean your rifle.  You could cause serious damage to your fine rifle without one. The need for the bore guide is that it;

1. Keeps solvents and paste out of the action, box magazine, lug area, and other places that solvents and paste should not be.

2. Helps prevent damage to throat area as you insert and then clean the barrel.  A metal jag or the cleaning rod should not be rubbing against or striking the lead area (front of throat) of the chamber.

The bore guide should be made of a material that when inserted will not damage the chamber area and fit nice and tight so it does not leak.  Presently a softer plastic type material that is solvent resistant should be used.  The guide should be long enough to reach all the way into the chamber area and be secure in the chamber against the throat and stick out far enough at the back to clear the back of that action with ease.  Some accuracy shooters like the length to be far enough back so that it clears the rifle scope too.

Many accuracy shooters like a solvent port in the back of the bore guide to help reduce the amount of solvent that drips off the rod tip before insertion to the guide.

We are in continuous in search of the best bore guides; units that we use ourselves, test, abuse, and get input from our shooters on them.  We continue to improve the guides all the time.

We offer bore guides for nearly every rifle caliber and action offered today.  As you look at our list of bore guides please be aware that not all we have may be listed and we encourage you to call as ask if you do not see one that you need.

UNIVERSAL SMALL CALIBER BORE GUIDES (less than 50 BMG)-

There are several "universal" bore guides offered in the market place today.  We strongly feel the Bore Tech brand is the best! We are again pleased to offer the universal bore guide made by Bore Tech company.  We use these high quality bore guides in our shop and highly recommend them to you.  Bore Tech makes 3 different sizes for all the various different rifle brands and calibers.  While a Bore Tech universal bore guide does not provide the perfect fit like a custom bore guide, it is pretty darn good! We sell other high quality products from Bore Tech so be sure to take a look.  "Click here" to go to that section.

THE SMALL CALIBER UNIVERSAL BORE TECH, Inc.  BORE GUIDE SELECTION IS-

1. 17- to 25 caliber- (Gold color)-$33.58 It is a smaller diameter guide to fit the many different small actions offered today. It has a plastic "cone" in the front to enter and fit tight in the action to minimize any fluid leakage into the chamber or action while cleaning.  It has a "brass" fully adjustable lever that can be loosen and then tighten in the bolt notch of the stock to hold the bore guide in place as you clean. It has a solvent port at the very back of the guide to allow you to put the solvent on the patch or brush AFTER you put the rod in the guide.  This helps reduce excess fluid from dripping onto the stock or action. All parts of the guide are chemical resistant and can take a lot of abuse without damage or failing.  It is tough and it works!  

2. 25 to 30 caliber-(Red Color)-$33.58 It is a medium diameter guide to fit the many different medium actions offered today. It has a plastic "cone" in the front to enter and fit tight in the action to minimize any fluid leakage into the chamber or action while cleaning.  It has a "brass" fully adjustable lever that can be loosen and then tighten in the bolt notch of the stock to hold the bore guide in place as you clean. It has a solvent port at the very back of the guide to allow you to put the solvent on the patch or brush AFTER you put the rod in the guide.  This helps reduce excess fluid from dripping onto the stock or action. All parts of the guide are chemical resistant and can take a lot of abuse without damage or failing.  It is tough and it works!

3. 8mm to 416 caliber-(Green Color)-$33.58 It is a large diameter guide to fit the many different large actions offered today. It has a plastic "cone" in the front to enter and fit tight in the action to minimize any fluid leakage into the chamber or action while cleaning.  It has a "brass" fully adjustable lever that can be loosen and then tighten in the bolt notch of the stock to hold the bore guide in place as you clean. It has a solvent port at the very back of the guide to allow you to put the solvent on the patch or brush AFTER you put the rod in the guide.  This helps reduce excess fluid from dripping onto the stock or action. All parts of the guide are chemical resistant and can take a lot of abuse without damage or failing.  It is tough and it works!

4. Replaceable front plastic "cones"-  All sizes- In the event of damage or excessive wear the front plastic cone can be replaced with ease in each bore guide. Pack of 3- $7.83. Specify caliber.

5. WEATHERBY LARGER COLLAR- The Weatherby bore guide requires a special larger collar for the Bore Tech bore guide. It is a larger "collar" to greatly improve the fit of the guide for Weatherby actions. Add $16.49 each to the bore guide cost.

SMALL CALIBER CUSTOM BORE GUIDES- "CLICK HERE" FOR MORE INFORMATION

Our Custom Bore Guides are made to custom fit all the many different actions offered today.  We pride ourselves in offering a complete line of custom "made to fit" bore guides.  All are made with a tough solvent resistant material with a rubber solvent resistant "O" ring that provides avery tight fit."CLICK HERE" to see more.

50 BMG CUSTOM RIFLE BORE GUIDES-"CLICK HERE" FOR MORE INFORMATION

Presently there are no bore guides that are universal in design so we offer a nearly full line of very high quality custom made bore guides for the big 50 BMG.  In each case we have directly measured and custom fitted each bore guide to each brand of action. We then rely on individual shooters to give us feed back on the fit and ease of use of our custom bore guides.  You can buy our bore guides with full confidence that they will fit your big 50 or we will make it right so it does fit! All are made with a tough solvent resistant material with a rubber solvent resistant "O" ring that provides a very tight fit. "CLICK HERE" to see more.

Please remember that we give FREE TECH SUPPORT for all products we sell any time day or night!!  Buy with confidence.  If you do not like our bore guides for any reason we will buy them back from you!  We will even pay the return shipping!  NO RISK!

520-586-2582

or by Email at

This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Now Offering....

 

Go to top